How to Troubleshoot Your Garage Door Opener
A garage door opener is without a doubt extremely useful, due to the fact that it secures very good your property, and therefore, prevent burglaries. What can you do if at some point the door won’t work properly anymore? Do you know what you need to do? If this happens it is better to be well informed in order to know exactly what must be done. Here is how to troubleshoot your garage door opener.
The first thing you must do is to check your door
What you need to do is to pull the emergency release cord while the door is closed. Try and lift the door, and see if it works or not. If it works, then see if it closes and opens smoothly. In case it does, then the problem is not with the opener, but with the springs, rollers or tracks.
What can you do if the wall switch doesn’t work
Usually, when the wall switch doesn’t work, the remote control works properly. However, if this happens you have two options. The first one is to replace the switch wires, and the second one is to replace the wall switch. In order to find out exactly what you need to do, you must unscrew the switch. Once you have done this, you will need to touch those two wires. In case the opener works, then what you need is a wall switch, which is quite affordable. On the other hand, if the opener doesn’t work, then you will need to change the switch wires.
What must be done if the remote control doesn’t work?
If you encounter this problem, then the first thing you must do is to replace the batteries and see if the problem persists or not. If it does, then you will probably need to get a new remote control. If you don’t find one for the model you have, then a great idea would be to get a universal one. Furthermore, you could install a new receiver. It is up to you what you choose to do, as long as your door opener will work properly again.
What if the lights don’t work anymore
If everything else goes perfect except the lights, then what you need to do is to replace the socket. For this sort of job you have to remove the circuit board, so that you can reach the socket. You will definitely find a tutorial on the internet, and following all the steps, you will definitely obtain the desired result. Replacement sockets are quite affordable, and therefore, you won’t need to spend too much money.